How to disable Dr. Watson for Windows
| Article ID | : | 188296 |
| Last Review | : | February 22, 2007 |
| Revision | : | 2.5 |
This article was previously published under Q188296
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 (http://support.microsoft.com/kb/256986/EN-US/) Description of the Microsoft Windows Registry
SUMMARY
This article describes how to disable and re-enable the Dr. Watson program for Windows.
Back to the topMORE INFORMATION
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
Registry entries for debugger programs are located in the AeDebug key in Windows. The Dr. Watson program is installed by default in Windows, and is configured to run when an application error occurs (with a data value of 1 for the Auto value). The default values are:
Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
To disable Dr. Watson
| 1. | Click Start, click Run, type regedit.exe in the Open box, and then click OK. |
| 2. | Locate and click the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\AeDebug NOTE: Steps three and four are optional, but they necessary if you want to restore the default use of Dr. Watson. |
| 3. | Click the AeDebug key, and then click Export Registry File on the Registry menu. |
| 4. | Enter a name and location for the saved registry file, and then click Save. |
| 5. | Delete the AeDebug key. |
Value Name = Auto
Type = String (REG_SZ)
Data Value = 1 or 0. (Default is 1)
Value Name = Debugger
Type = String (REG_SZ)
Data Value = drwtsn32 -p %ld -e %ld -g
NOTE: This data value (drwtsn32 -p %ld -e %ld -g) is specific to Dr. Watson. Alternative debuggers will have their own values and parameters.
Type = String (REG_SZ)
Data Value = 1 or 0. (Default is 1)
Value Name = Debugger
Type = String (REG_SZ)
Data Value = drwtsn32 -p %ld -e %ld -g
NOTE: This data value (drwtsn32 -p %ld -e %ld -g) is specific to Dr. Watson. Alternative debuggers will have their own values and parameters.
To enable Dr. Watson
| 1. | At a command prompt, type the following line, and then press ENTER: drwtsn32 -i |
| 2. | Double-click the .reg file you created in steps three and four above. |
APPLIES TO
| • | Microsoft Windows XP Home Edition |
| • | Microsoft Windows XP Professional |
| • | Microsoft Windows Server 2003, Standard Edition (32-bit x86) |
| • | Microsoft Windows Server 2003, Enterprise Edition (32-bit x86) |
| • | Microsoft Windows 2000 Server |
| • | Microsoft Windows 2000 Advanced Server |
| • | Microsoft Windows 2000 Professional Edition |
| • | Microsoft Windows 2000 Datacenter Server |
| • | Microsoft Windows NT Workstation 4.0 Developer Edition |
| • | Microsoft Windows NT Server 4.0 Standard Edition |
| • | Microsoft Windows NT Server 4.0 Enterprise Edition |
Keywords: |
kbhowto KB188296 |
